Snack Puffed Extruder-manufacture,factory,supplier from China

How to Produce Extruded Instant Yam PowderToday we are going to introduce a healthy and delicious snack - puffed yam powder! This snack not only has a unique taste, rich nutrition, but also has a variety of health functions, is the best choice for your healthy life. Technological processRaw material preparation → mixing → conveying → extrusion → conveying → drying → crushing → packagingNutritional value of extruded yam powderThe extruded yam powder process is a kind of healthy snack made of yam through multiple processes.

Principles and Advantages of Puffed FoodPuffed food, also known as extruded food, exploding food, light food, etc., is a new type of food developed internationally in recent years. It uses grains, beans, potatoes, vegetables, etc. as raw materials, and is processed by puffing equipment to produce a wide variety of food with exquisite appearance, rich nutrition, crispy and delicious food. Therefore, a large category of food has been formed uniquely.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

IntroductionSecondary extrusion technology is a common food production process, mainly used in the production of various puffed foods, such as edible puffed potato chips, shrimp chips, squid rolls, puffed pea crisps, etc. The principle is to destroy the starch granules under high temperature and high pressure, so that the food can expand rapidly. The following is a brief introduction to the specific process of secondary extrusion.process flow1. Raw material preparation  First of all, high-quality raw materials need to be selected.

Processing Technology of Puffed Instant Yam Powder01Mixing machine: Add nutritional additives and a certain proportion of water to the raw materials and mix them evenly.02Feeding machine: transports the mixed raw materials to the feeding hopper of the extruder.03Extruder: It is produced using the world's most advanced twin-screw extruder, which allows the starch granules to expand and refine during the puffing process of yam at high temperature, high pressure, and high shear force, and the starch molecular chains open, increasing the surface area of the food particles.

Advantages of Twin Screw Square Barrel ExtruderTwin-screw square barrel extruders are mainly used to produce various snacks and foods. Including puffed snacks, fried snacks, artificial rice, macaroni, etc.

                                                                  Twin screw extruder                                         Puffed feed is a kind of bulky and porous feed after puffing treatment.

Wheat Bran Puffing Snack Making MachineWheat bran, a by-product of wheat flour processing, is yellow, flaky or powdery. There is part of the germ (that is, the part where the wheat sprouts) at the end of the wheat hull, accounting for about 5-10% of the total wheat hull. About 1/3-1/2 of the wheat hull has gone into the flour. The total wheat hull is Divided into 6 layers, the outer 5 layers contain more crude fiber, less nutrients, and are difficult to digest. Wheat hulls contain large amounts of B vitamins.

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

Advantages of twin-screw extrusion extruder(1) The adaptability of raw materials is wider, and it can adapt to the processing of raw materials with high viscosity, low viscosity, high oil content, high moisture or viscosity, oily, very wet and other slippery materials in single screw (SSE).(2) There are fewer restrictions on the particle size of raw materials, which can be adapted to the processing of raw materials with a wide particle size or from fine powder to coarse powder particles and raw materials with particle sizes outside the specific range of single-screw processing.(3) The material